Send Message
Home ProductsPortable Hardness Tester

Scratch Resistance Portable Pencil Scratch Hardness Tester For Surface Coatings Car Type

Certification
China Dongguan Quality Control Technology Co., Ltd. certification
China Dongguan Quality Control Technology Co., Ltd. certification
Customer Reviews
The touch screen micro vickers hardness tester has been installed a few weeks ago, everything is OK. Thanks for your advice and excellent service.

—— Mr. David Chambers

Thanks for the fast delivery and our customer is very satisfied for the rockwell hardness tester, and hope more orders soon.

—— Neil Renato

After we visited the customer, they finally decided to purchase Brinell hardness tester iBrin-413Z, now we have installed the unit at customer’s site,

—— Fermin Lee

Thank you for the indenters (diamond  cone 120 degrees). We recently got it and already tested it. Indenters  are good as we expected. 

—— Dalius Skinulis

The Measurements are good for Brinell Tester HBST-3000.

—— Sun Chull Kim

Hey, the hardness tester iVick-484ST was installed last week and works well, thanks for the professional support.

—— Sabinian Smith

I am glad to inform you that the installation of the SHB-3000C Brinell hardness tester has been finished successfully. I would like to thank you!

—— Robbin

I'm Online Chat Now

Scratch Resistance Portable Pencil Scratch Hardness Tester For Surface Coatings Car Type

Scratch Resistance Portable Pencil Scratch Hardness Tester For Surface Coatings Car Type
Scratch Resistance Portable Pencil Scratch Hardness Tester For Surface Coatings Car Type Scratch Resistance Portable Pencil Scratch Hardness Tester For Surface Coatings Car Type Scratch Resistance Portable Pencil Scratch Hardness Tester For Surface Coatings Car Type

Large Image :  Scratch Resistance Portable Pencil Scratch Hardness Tester For Surface Coatings Car Type

Product Details:
Place of Origin: Dongguan/China
Brand Name: iqualitrol
Certification: CE
Model Number: iAS-H120P
Payment & Shipping Terms:
Minimum Order Quantity: 1 Set
Price: Negotiable
Packaging Details: Carton Box
Delivery Time: 20 Working Days
Payment Terms: T/T, Western Union
Supply Ability: 100 Sets per Month
Detailed Product Description
Loading Weight: 1000g, 750g, 500g Angle: Measurement Angle 45°
Scratch Speed: About 1 Mm/s Application: Coatings
High Light:

Portable Pencil Hardness Testers

,

Pencil Scratch Hardness Tester

 

Scratches Resistance Portable Pencil Scratch Hardness Tester For Surface Coatings Car Type

 

1. Application:

Pencil hardness tester is used to test coatings for their hardness and resistance to scratches and wear. The test method allows the use of pencils which have a known hardness grade to be moved over the surface to be tested at a fixed angle and pressure.

 

 

2. About Pencil Hardness Tester

The pencil lead, prepared beforehand by using the special pencil sharpener and rubbing it on fine abrasive paper (400 grade), is maintained at an angle of 45° and pushed with uniform pressure on to the sample, leaving either a superficial trace or causing destruction down to the substrate.

The Pencil Hardness Tester is supplied complete with stand and a series of 14 pencils, ranging from 6B to 6H hardness values.

 

 

3. Measuring Method

3.1 Before You Star

The test should be carried out at 23°C ± 2°C (73.5°F ± 3.5°F) and 50% ± 5% relative humidity, unless otherwise agreed.

 

3.2 Prepare The Pencils

1) Use the special pencil sharpeners supplied:

Use sharpener T99923040-1 for pencils 6H, 5H, 4H, 3H, 2H, H, F, HB, B and 2B. Use sharpener T99923040-2 for pencils 3B, 4B, 5B and 6B.

Sharpen until approximately 5 mm to 6 mm (¼") of lead, is exposed taking care to leave the exposed lead unmarked.

2) Place a sheet of abrasive paper (400 grade) on a flat, hard surface.

3) Hold the pencil at 90° to the abrasive paper and rub the lead until a flat, smooth and circular cross-section is achieved. Ensure that the edge is free of chips or nicks.

 

3.3 Select a Pencil

When testing to BS 3900 E19 and ISO 15184, always start with the softest pencil (6B) and then work up the hardness scale.

When testing to ASTM D 3363, always start with the hardest pencil (6H) and then work down the hardness scale.

 

3.4 Push The Pencil

Place the test panel on a level, firm, horizontal surface.

Hold a pencil firmly with the lead at an angle of 45° to the surface of the test panel and the point facing away from you.

Push the pencil away from you approximately 6 mm (¼") applying sufficient downward pressure to cut or scratch the coating or to crumble the edge of the lead.

 

3.5 Inspect

Check the test surface by either close visual inspection, by feel using a fingernail or, if agreed, using a microscope with between x6 and x10 magnification.

For ASTM D 3363 identify the end point of the test as follows:

• Gouge hardness; the hardest pencil that leaves the coating uncut over a stroke length of at least 3 mm.

• Scratch hardness; the hardest pencil that will not rupture or scratch the coating. For ISO 15184 note one or both of the following defects:

• Plastic deformation; a permanent indentation in the paint surface without cohesive fracture.

• Cohesive fracture; the presence of a visible scratch or rupture in the surface of the paint film, material having been removed from the paint film.

 

3.6 Repeat The Test

The test procedure (2.3 to 2.5) should be repeated 12 mm (½”) away from the first test using the next pencil. If the two test results differ by more than one unit of pencil hardness, discard the results and repeat the test.

 

3.7 Test Report

The following information should be contained in any report on the results of the Pencil Test:

• The type of defect resulting from the test.

Note: In some cases the two test end points will be the same.

• The make and manufacture of the pencils used.

• Any deviation from standard conditions including the temperature and humidity conditions of the test and the roughness of the coating surface.

• The magnification of the microscope, if one is used.

 

Note:

Hardness tester with tip load of 500g weighs 2kg before packing. Plus foam cardboard and other packaging should be 2.5kg weight.

Hardness tester with tip load of 750g weighs 2.4kg before packing. Plus foam cardboard and other packaging should be 3kg weight.

Hardness tester with tip load of 1000g weighs 2.5kg before packing. Plus foam cardboard and other packaging should be 3kg weight.

 

4. Technical Data:

Load Weight 1000g /750g /500g
Measurement Angle 45°(Between Pencil and Measured Surface)
Three Touch Points Two Wheels, A Pencil Core
Scratch Speed About 1 mm/s
Standard Configuration Pencil Hardness Tester
1000g Weight
750g Weight
Pencils (6B-6H)
Eraser
Knife
Horizontal Pad Block
Sandpaper

 

Scratch Resistance Portable Pencil Scratch Hardness Tester For Surface Coatings Car Type 0

 

Contact Details
Dongguan Quality Control Technology Co., Ltd.

Contact Person: Mr. Raymond Chung

Tel: 86-13711988687

Fax: 86-769-22784276

Send your inquiry directly to us (0 / 3000)